Table of Contents
Advertisement
Installation Tasks
Perform the following tasks to safely install your USB- or PCI-based
emulator. Follow these instructions in the presented order to ensure
correct operation of your software and hardware.
Installing USB-Based Emulators
1. Install VisualDSP++. VisualDSP++ includes the USB driver needed
for your USB emulation hardware. If VisualDSP++ is already
installed, you do not need to install it again. VisualDSP++ can be
installed on Windows 2000, Windows XP, or Windows Vista.
Refer to the Installation Quick Reference Card for details.
Note: If you connect the ICE first, before installing VisualDSP++,
the Windows driver wizard will not be able to find the drivers to
install for the emulator to function.
2. Connect the USB cable between the USB assembly and a USB port
of your computer.
3. Verify driver installation. Refer to
on page
1-4.
Before connecting to a target, see the power-up/down procedures
in
"Attaching the Cable to the Emulation Target" on page
HPUSB, USB, and HPPCI Emulators User's Guide
Getting Started
"Verifying Driver Installation"
1-6.
1-3
Advertisement
Table of Contents
