Analog Devices HPUSB User Manual page 37

4 REFERENCES
This section describes documentation resources helpful in your applica-
tion development.
• For information on designing the interface between an Analog
Devices SHARC processor and the emulation header on your
custom processor target board, refer to Engineer-to-Engineer Note,
Analog Devices JTAG Emulation Technical Reference (EE-68),
available from the Analog Devices Web site.
• For information on the architecture and system interface of the
Analog Devices processor, refer to the appropriate Analog Devices
processor's Hardware Reference.
• For processor timing specification and other hardware design
information, refer to the appropriate processor's Data Sheet.
• For complete information on software development tools
(assembler, compiler, linker, and so on), refer to documentation
included with VisualDSP++. This information is available in PDF
format and in VisualDSP++ online Help.
• For information about your development platform, refer to your
operating system manuals and hardware system manuals.
HPUSB, USB, and HPPCI Emulators User's Guide
4-1 