Hppci-Ice Leds; Pod Leds - Analog Devices HPUSB User Manual

LEDs

HPPCI-ICE LEDs

Four LEDs are located on the pod enclosure
are located on the daughter board

Pod LEDs

Figure 2-1. Pod LEDs
• 1.8V LED – In auto detection mode, this LED signifies that a
target VDDIO of 1.8V has been detected on the JTAG header
(pin 5) on the processor target board, and the HPPCI-ICE drives
all signals at 1.8V compliant levels.
• 2.5V LED – In auto detection mode, this LED signifies that a
target VDDIO of 2.5V has been detected on the JTAG header
(pin 5) on the processor target board, and the HPPCI-ICE drives
all signals at 2.5V compliant levels.
2-2
(Figure
HPUSB, USB, and HPPCI Emulators User's Guide
(Figure 2-1), and five LEDs
2-2).