Table of Contents
Advertisement
Available languages
Available languages
5) Temperature setting of refrigerating chamber
Press temperatureadjusting button ofthe refrigerating chamber [I REF-TEl\/IF,'- refrigerating chamber region
will make flashing indication. Then press the button :| REF.TEMP. again to set the temperature, and will hear
one beep. Setting scope is between 2°C and 8°C.Every time you press the button, the temperature will
change 1°C. After adjusting,the digital tube will keep flashing for 5 seconds. New temperature
setting will come into effect after locking.
.
6) Temperature setting of freezing chamber
Press temperature adjusting button ofthe fr ezing chamber [I FRZ-TEMP-, freezing chamber region will make
flashing indication. Then press the button Ii FRZ.TEM P-again to set the temperature, and you will hear one
beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the temperature will
change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New temperature setting
will come into effect after locking.
Recommended setting: Refrigerated chamber4 °C, freezing chamber - 18 °C.
7 ) Storage upon power failure
ln case of power failure, the instant working state will be locked and maintained till re-electrification.
8 ) Opening warning and alarm control
When the refrigerator doors get open, the opening music will play. if the door is not
closed in two minutes, the buzzer will sound once every second till the door is closed. Press any button
to stop the buzzer alarm.
9 ) Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall contact
a maintenance specialist for maintenance, so as to ensure optimized operation of the appliance.
Fault Code
Fault Description
Temperature sensor failure
E1
of refrigerating chamber
.
Temperature sensor failure
of freezing chamber
E2
E5
Freezing defrost sensor detection
circuit error
E6
Communication error
Ambient temperature sensor error
E7
12
Advertisement
Table of Contents
