Respekta AC179IX Instructions For Use Manual page 29

2.3 Levelling door
1 ) Precautions before operation:
Before operation of accessories, it shall be ensured that the refrigerator is disconnected from power
Before adjusting the door, precautions shall be taken to prevent any personal injury.
2) Schematic diagram of levelling the door body
List oi tools to be provided by the user
wrench
Adjusting nut
Fixed shaft Y
_ "7
we, Iii?
_ -- LL11
,.|-—-=-.-.:=|
it
L!
W 7
levelling feet
Wrench
Y Lookin nut i
\
I
I
(The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor)
When the fridge door is low:
Open the door, use a wrench to loosen the locking nut and to rotate the adjusting nut anti-clockwise
to raise the height ofthe door. Once the doors are aligned, then tighten the locking nut by
rotating it anti-clockwise.
When the fridge door is high:
Open the door, use a wrench to rotate the adjusting nut clockwise to lower the
height ofthe door. Once the doors are aligned, then tighten the locking nutby
rotating it anti-clockwise.
8