Respekta AC179IX Instructions For Use Manual page 30

2.4 Changing the Light
Any replacement or maintenance of the LED lamps is intended to be made by
the manufacturer, its service agent or similar qualified person.
2.5 Starting to use
o Before initial start, keep the refrigerator still for half an hour
W before connecting it to power supply.
- ' Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
; 740mm
045mm
890mm
lid
' Spare enough space for convenient opening of the doors and drawers.
,,,,.. — oThe picture above is only for reference. The actual configuration will
depend on the physical product or statement by the distributor
l' 'l
1440mm
2.6 Energy saving tips
0 The appliance should be located in the coolest area ofthe room, away from heat
producing appliances or heating ducts, and out ofthe direct sunlight.
I Let hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
lose quality, or spoil.
' Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
, Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
g Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
9