Operating Instructions
Instructions for operating the Puck Handset are shown below.
48
Turning the Fireplace On/Off
ON:
Firmly press and hold the
sequence has begun; release button.
OFF:
Firmly press the
Increase/Decrease Flame Height
INCREASE:
To increase flame height, press and hold
DECREASE:
To decrease flame height, press and hold
–
Holding the
button long enough sets the fireplace to pilot flame (Standby Mode).
Designated Flame Settings
DESIGNATED LOW FLAME SETTING
To go to designated low flame setting, double-click
NOTE: Flame goes to High Flame before going to Low Flame.
DESIGNATED HIGH FLAME SETTING
To go to designated high flame setting, double-click + button.
button until two short beeps confirms the start
button.
+
button.
–
button.
–
button.