Table of Contents
Advertisement
Gas Conversion
Gas conversion (NG to LP or LP to NG) can be done in the field. Gas conversion must only be performed by a technician who has
specific authorization by Ortal to change these components. The conversion kit must be supplied by Ortal. Using parts from other
manufacturers or having an unauthorized party perform the conversion will void your fireplace's warranty. Conversion instructions
are supplied with the conversion kit.
44HH series NG to LP Conversion Kit: GCNL100O-US
44HH series LP to NG Conversion Kit: GCNLP100DO-US
High Altitude Requirements
For elevations above 2,000 feet, fireplace shall be re-rated 4% for each 1,000 feet above sea level.
Gas and Electrical Components
Assemblies and components are listed and described in the tables following the figure.
Part
Number
ASB001
D23
D36
G02
G301
G202-XRGB
G203-W2ME
G07
Wire Harness for Receiver and Gas
G09
G10
Switch w. cables 180/500 mm
G11
G12
G75
G14
The manufacturer of Ortal's gas and electrical components is Mertik Maxitrol. For information on these components, please visit the
manufacturer's website: www.mertikmaxitrol.com
Description
Pilot Bracket
Orifice LPG
Orifice NG
Mertik Gas Valve
Symax Receiver
Wi-Fi Box (optional)
Wi-Fi Cable (optional)
Thermocouple Block
Valve
Spark Wire
Pilot Base
Thermocouple NG
Thermocouple LPG
Part
Number
ASB002
G13
Electrode Target Type
G121
Main Burner Gas Fitting
G25
G19
G34
G35
Thermocouple Connector
OLIVE D.4 Pilot gas tube compression ring
G36
G37
Pilot gas tube fitting burner side
G38
Pilot Assembly Gasket
G45
G58
Connection fitting 4mm One-piece
G47
Fitting for main line inlet to gas valve GV60
Description
Pilot Gasket
Burner Gas Tube
Pilot Gas Tube
Spark Plug Connector
valve
Red Cable
39
Advertisement
Table of Contents
