Fluidwell F Series Manual page 7

For the Operator, the following functions are available (if activated):
•
Display value and measuring unit
This is the main display information of the F490-A-PL. After selecting any other information, it
will always return to this main display automatically.
•
Display actual mA value (if activated)
After pressing SELECT, the actual input current (mA) will be displayed.
•
Display 0% / 100% (if activated)
After pressing SELECT a few times, the 0% value and 100% value will be displayed.
•
Under range / over range
If the input current is in-between 3.5mA and 3.75mA "-----" will be displayed.
-
- If the input current is in-between 3.75mA and 4mA the value corresponding to 4mA will be
displayed.
- If the input current is in-between 20 mA and 22mA the calculated value will represent the
extrapolated span value.
If the input current is above 22mA the value "999999" will be displayed.
-
FW-F490-A-PL_v0504_06_EN.docx
Page 7