Safety; Safety Precautions - Ransburg 9060 Service Manual

SAFETY

SAFETY PRECAUTIONS

Before operating, maintaining or servicing any Ransburg
electrostatic coating system, read and understand all of the
technical and safety literature for your Ransburg products.
This manual contains information that is important for
you to know and understand. This information relates
to USER SAFETY and PREVENTING EQUIPMENT
PROBLEMS. To help you recognize this information, we
use the following symbols. Please pay particular attention
to these sections.
A WARNING! states information to alert you to
a situation that might cause serious injury if
instructions are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the
procedure in progress.
While this manual lists standard specifications and
service procedures, some minor deviations may be found
between this literature and your equipment. Differences
in local codes and plant requirements, material delivery
requirements, etc., make such variations inevitable.
Compare this manual with your system installation
drawings and appropriate Ransburg equipment manuals
to reconcile such differences.
Careful study and continued use of this manual will provide
a better understanding of the equipment and process,
resulting in more efficient operation, longer trouble-free
service and faster, easier troubleshooting. If you do not
have the manuals and safety literature for your Ransburg
system, contact your local Ransburg representative or
Ransburg.
CP-17-02
9060 Classic High Voltage Controller -
† The user MUST read and be familiar with
the Safety Section in this manual and the
Ransburg safety literature therein identified.
† This equipment is intended to be used by
trained personnel ONLY.
† This manual MUST be read and thoroughly
understood by ALL personnel who operate, clean
or maintain this equipment! Special care should
be taken to ensure that the WARNINGS and
safety requirements for operating and servicing
the equipment are followed. The user should be
aware of and adhere to ALL local building and fire
codes and ordinances as well as NFPA-33 AND
EN 50176 SAFETY STANDARDS, LATEST
EDITION, or applicable country safety standards,
prior to installing, operating, and/or servicing this
equipment.
† The hazards shown on the following pages
may occur during the normal use of this equipment.
Please read the hazard chart beginning on page 2.
Return To Contents
W A R N I N G
!
W A R N I N G
!
SAFETY
1