Ransburg DynaFlow A12233 Service Instruction

SERVICE INSTRUCTION
The DynaFlow fluid flow controller (Models A12233 and 77376) and RansFlow fluid flow con-
troller (Model A12410) have been revised to comply with the latest CE directives and stand-
ards. This compliance kit has been assembled to allow minor field modification of these con-
trollers to add the required hardware and documentation.
1. An input line filter is required (p/n A13226) to be wired between the input power conductors
and the internal power supply. Mounting instructions and wiring diagrams can be found below
and in the kit with the filter.
CE Compliance Kit
SERVICE INSTRUCTION
SI–13– 01
January 2013
1