Table of Contents
Advertisement
DR-1 Plastic Fluid Regulator - Safety
SAFETY
SAFETY PRECAUTIONS
Before operating, maintaining or servicing any Rans-
burg electrostatic coating system, read and under-
stand all of the technical and safety literature for your
Ransburg products. This manual contains information
that is important for you to know and understand. This
information relates to USER SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this
information, we use the following symbols. Please
pay particular attention to these sections.
A WARNING! states information to alert you to a situ-
ation that might cause serious injury if instructions
are not followed.
A CAUTION! states information that tells how to
prevent damage to equipment or how to avoid a
situation that might cause minor injury.
A NOTE is information relevant to the procedure in
progress.
While this manual lists standard specifications and
service procedures, some minor deviations may be
found between this literature and your equipment.
Differences in local codes and plant requirements,
material delivery requirements, etc., make such
variations inevitable. Compare this manual with
your system installation drawings and appropriate
Ransburg equipment manuals to reconcile such
differences.
Careful study and continued use of this manual will
provide a better understanding of the equipment and
process, resulting in more efficient operation, longer
trouble-free service and faster, easier troubleshooting.
If you do not have the manuals and safety literature
for your Ransburg system, contact your local Ransburg
representative or Ransburg.
1
W A R N I N G
!
>
The user MUST read and be familiar with the
Safety Section in this manual and the Ransburg
safety literature therein identified.
>
This manual MUST be read and thoroughly
understood by ALL personnel who operate, clean
or maintain this equipment! Special care should
be taken to ensure that the WARNINGS and safety
requirements for operating and servicing the
equipment are followed. The user should be
aware of and adhere to ALL local building and
fire codes and ordinances as well as NFPA-33
SAFETY STANDARD, prior to installing, operating,
and/or servicing this equipment.
W A R N I N G
!
>
The hazards shown on the following page
may occur during the normal use of this equip-
ment. Please read the hazard chart beginning
on page 2.
LN-9228-00.3
Advertisement
Table of Contents
