Table of Contents
Advertisement
SERVICING SOLO 3 375 – TUBE INSTALLATION
5a. Shift brackets into the latched position to ensure stability.
5b. Ensure the locking screw nut is fully disengaged, allowing for cassette engagement.
5c. Reinsert the cover by positioning straight-on, then rotating downwards to engage with the
locking screws.
NOTE: The locking screws will "click" once they have engaged and the cassette face will align with
the end cap.
6. Tighten the locking screws until snug, closing any gap between the end cap and the cassette, locking
the cover in place.
7. To reinstall the screen, refer to page 6: INSTALLATION.
Servicing – Tube Installation
Locking
Screws
end cap locking screw
3/32" allen wrench
21
Advertisement
Table of Contents
