Screen Innovations Solo 3 Installation Instructions Manual page 17

SERVICING SOLO 3 375 – TUBE REMOVAL
2. Material tube removal from the cassette:
Locate the motor side of the material tube; push toward the opposite, idler side. The idler spring will
depress and disengage, allowing disengagement of the motor (connector) side from the end caps.
Once the motor side clears the end cap, pull the tube assembly away from the idler to complete
removal.
NOTE: At least two people are required to safely perform tube removal.
NOTE: The screen system is now ready for any service.
If any concerns on swapping the motors or material tube arise, call SI Screen Support at
512.832.6939 or email screensupport@screeninnovations.com
Servicing – Tube Removal
17