Introduction; Packaging Content; The All-In-One Instrument; Contactless Configuration - Veratron VL FLEX 52MM Series User Manual

INTRODUCTION

PACKAGING CONTENT

Part Number
B00086001
A2C5205947101
A2C59512947
B000100

THE ALL-IN-ONE INSTRUMENT

The VL Flex device can easily be configured to be the instrument you need - thanks to its sun-readable 1.44"
TFT display embedded into a standard 52 mm instrument housing.
The supported analog inputs allow you to directly read from the sensors. In addition, the J1939 and the LIN
2.0 interfaces make it possible for the VL Flex to read from the digital networks as well.
The simple but effective graphic design can be set up in a single or dual layout, presenting the data in a clear
and intuitive form, while the colored bar graph and the alarm display allow you to visually understand your
data.

CONTACTLESS CONFIGURATION

Thanks to the contactless configuration you can setup your all-in-one instrument with a simple tap!
Launch the companion App and define your settings through the user-friendly interface, then simply hold
your mobile device in proximity of the VL Flex device to transfer the configuration.
Thanks to the embedded passive antenna the configuration can be done powerless.
Description
1x VL Flex J1939
1x 52 mm Mounting Spinlock
1x 8-pole cable
1x Safety instructions
INTRODUCTION
B001026