CONFIGURATION
VL FLEX CONFIGURATOR APP
In order to configurate the VL Flex 52 – J1939, one must set a couple of parameters, such as display layout,
the selected sensor and its calibration or the alarm threshold.
This is possible via the smartphone app "VL Flex Industrial", which can be downloaded free of charge from
the according stores.
A simple explanation of the configuration procedure can also be found on the app as an in-app-instruction.
Thanks to the passive embedded NFC receiver, the VL Flex 52 can be configured, as described below,
without the need of a power supply.
SYSTEM CONFIGURATION
The setup of the VL Flex device is an intuitive three-step process.
Please remember that you must READ from the device before being able to manipulate and download the
configuration to the instrument.
1. READ
VL FLEX
INDUSTRIAL
2. CONFIGURE
CONFIGURATION
3. WRITE
B001026