Display Layout; Single Layout; Dual Layout - Veratron VL FLEX 52MM Series User Manual

DISPLAY LAYOUT

SINGLE LAYOUT

A. Symbol
Indicates, which data type is displayed right now.
For the data types, which support this function, there is
also the instance indicated here.
B. Unit
Shows the unit of the currently displayed data.
For some data types it's possible to change the unit in the
settings. (See table "Supported Configurations")
C. Measured value
This shows the numeric value of the dedicated measured
data. If there aren't any values received for this data type
or they are out of range, the display will show "---".
Coloured Graphic
The coloured graphic in the background is a bar diagram
that puts the measured value in perspective. This
function isn't supported for all data types.
The white lines on the left side show the scalation.

DUAL LAYOUT

A. Symbol
Indicates, which data type is displayed right now.
For the data types, which support this function, there is
also the instance indicated here.
B. Unit
Shows the unit of the currently displayed data.
For some data types it's possible to change the unit in the
settings. (See table "Supported Configurations")
C. Measured Value
This shows the numeric value of the dedicated measured
data. If there aren't any data received for this data type or
the values are out of range, the display will show "---".
The bar graph can't be displayed in the dual layout for any
value.
DISPLAY LAYOUT
A
C
B
A
B
C
B001026