Dio Ipso Definition; Output Configuration Registers - Omega SP-006 User Manual

6.4.2

DIO IPSO Definition

The DIO input IPSO definition provides signal range, measured min/max values, IPSO object type
information.
Offset
0xa8
0xaa
0xac
0xb0
0xb4
0xb8
0xbc
6.4.2.1
7
0
15
0
6.5

Output Configuration Registers

Outputs share a common structure which consists of 3-fields mapped to a 16-bit unsigned integer, accessible in the
Smart Sensor register map.
Output
0
1
2
3
Refer to the specific output type for further information.
Name
Sensor Type
Precision
Sensor Trigger
Min Measured
Max Measured
Min Range
Max Range
Sensor Trigger Function
The Sensor Trigger function is used to reset the IPSO min/max values as well as controlling the
Calibration process.
6 5
0 0
14 13
0 0
Setting the Reset Min/Max bit to 1 will reset the Min/Max values recorded by the IPSO process. No
User Calibration process is supported on the DIO inputs and all Configuration bits should be written
as 0.
Name
Output 0 Descriptor
Output 1 Descriptor
Output 2 Descriptor
Output 3 Descriptor
Value
3349 Bit Mapped Digital
0 Provides reading of xxx
?? Write 0x0001 force reset of min / max
?? Minimum reading since the last reset
?? Maximum reading since the last reset
0 Minimum reading
3 Maximum reading
Sensor Trigger Function
4 3
0 0
12 11
0 0
Modbus I2C
Address Address
0xf09a 0x0134 uint16
0xf09b 0x0136 uint16
0xf09c 0x0138 uint16
0xf09d 0x013a uint16
Description
2 1
0 0
10 9
0 0
Size Typical Description
PWM 0 (see below)
PWM 1 (see below)
Phantom (non-configurable)
Phantom (non-configurable)
0
Reset
Min/Max
8
0
27 | M 5 7 7 9