Introduction; Scope Of Application; Applicable Models; Applicable Users - Autel Robotics Dragonfish Series Maintenance Manual

Hide thumbs Also See for Dragonfish Series:
Table of Contents

Advertisement

Introduction

Dragonfish series tilt-rotor UAS (Unmanned Aircraft Systems), as the industry-level UAS aviation
products, is highly professional, which can be reflected by not only the products themselves but in
the whole life cycle. To address its superiority, both operators and maintenance workers of the
product series must be equipped with full aviation knowledge and certain understandings of aviation
products.
The Dragonfish Series Maintenance Manual (hereinafter referred to as "the Manual") is a tool
document prepared based on the aforesaid requirements, which can be referred to by the
maintenance workers and users of Dragonfish series products (hereinafter referred to as
"Dragonfish") for necessary inspection and maintenance in their whole life cycle so that Dragonfish
could work efficiently with a longer service life.
This Manual mainly contains the professional opinions and attentions concerning inspection and
maintenance of Dragonfish, which can be consulted by users for their daily maintenance.
Corresponding forms are also available to record maintenance status of Dragonfish within the whole
life cycle and finally be sorted as the maintenance files of the UAS.
Prior to the use and maintenance of Dragonfish, please carefully read the descriptive documents,
including Operating Instructions and Maintenance Manual.

Scope of Application

This section describes the scope of application of this Manual, including the scope of applicable
models, applicable conditions of this Manual and the correspondence of operators and maintenance
workers in operation and maintenance.

Applicable Models

This manual is applicable to Dragonfish Standard series UAS manufactured by Shenzhen Autel
Robotics Technology Co., LTD.

Applicable Users

This Manual is applicable to the users of models specified herein. All operations in this Manual
must be subject to the scope specified in the table below.
Operations
Daily inspection and maintenance
Regular inspection and maintenance
On-site accident disposal
Loss assessment of accident
Maintenance of products after accident
Verification after accident
File record

Applicable Environment

All operations in this Manual must be performed under the required conditions instead of in an
illegal and unsafe environment. This section sets down the basic demands of some operations. Any
special operation environment will be further illustrated in the following chapters in detail.
Operations
Dragonfish Series Maintenance Manual
Users having undergone product use training and
maintenance workers certified or authorized formally
Maintenance workers certified or authorized formally
Users having undergone product use training and
maintenance workers certified or authorized formally
Maintenance workers certified or authorized formally
Maintenance workers certified or authorized formally
Maintenance workers certified or authorized formally
Users having undergone product use training and
maintenance workers certified or authorized formally
Personnel
Environment Requirements

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dragonfish Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents