Table of Contents
Advertisement
Table of Contents
Introduction
This manual describes the following models in the R980 Swing Arm Series of Tire Changers:
•
R980XR. 3 HP, 220 VAC Tire Changer; no Assist Tower.
•
R980AT. 3 HP, 220 VAC, Tire Changer with Assist Tower.
•
R980AT-L. 2 HP, 110 VAC, Tire Changer with Assist Tower.
More information about BendPak Ranger products is available at the
This manual is mandatory reading for all users
including anyone who sets up, operates, maintains, or repairs them.
You can always find the latest version of the
Ranger
website.
⚠
DANGER
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Tire Changer is available from your distributor or by calling
BendPak Ranger at (805) 933-9970. You may also call regarding parts replacement (please
have the serial number and model number of your unit available).
R980 Series of Tire Changers
3
4
4
6
8
9
10
11
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
of the R980 Series of Tire Changers,
manual for your product on the BendPak
3
BendPak Ranger
website.
P/N 5900158 - Rev. F - March 2022
26
55
58
59
60
63
87
Advertisement
Table of Contents
