Table of Contents
Advertisement
Installing the R30XLT Assist Tower on the R980XR
The following procedure details the installation of an optional Assist Tower for the R980XR, providing
enhanced functionality to the Tire Changer. The R30XLT may be ordered through
bendpak.com/support, or by calling BendPak Ranger at (805) 933-9970.
Components
The photo above shows the main components of the R30XLT Assist Tower:
•
R30XLT Assist Tower. Installed on top of the Main Tower of the R980XR Tire Changer.
•
Assist Tower Bolt Plate. Where the Assist Tower connects to the Tire Changer.
•
Assist Tower Cross Beam. Comes out of the Assist Tower Bolt Plate; holds the rest of the
Assist Tower mechanism in place. Good place to lift the Assist Tower.
•
Side Panel. On the R980XR Tire Changer far side, not seen here. The panel will be removed to
install the New Air Hose that comes with the Assist Tower and will be integrated with the Tire
Changer.
•
Main Tower. On the R980XR Tire Changer. The top of the Main Tower bolts to the Assist Tower
Bolt Plate.
R980 Series of Tire Changers
22
P/N 5900158 — Rev. F - March 2022
Advertisement
Table of Contents
