Table of Contents
Advertisement
Adjusting the elevation
Chapter 5 • Adjusting the antenna azimuth and elevation
36
1037751-0001 Revision A
1. Unlock the elevation by loosening the two 5/16-inch nuts in
the elevation scales on either side of the Az/El mount, as
shown in Figure 28.
Figure 28: Adjusting the elevation
2. Loosen the top elevation adjustment nut and spin it
counter-clockwise until it rides an inch or two up the
elevation rod.
3. Use the lower nut to adjust the elevation. As shown in
Figure 29, the bar at the left of the Az/El mount acts as a
pointer to indicate the value in the elevation scale. For
example, the antenna shown in the figure is adjusted to 42
degrees.
Advertisement
Table of Contents
