Usage Of The Drain Hose - Haier HWM60-728 User Manual

How to change the direction of the drain hose
1.Dismantle the back cover of the
washing machine.
2.Take off the drain hose frame. Put
down the drain hose , put the drain
hose into the cabinet, take off the
drain hose bushing
(As indicated in Figure 1).
Drain hose
Drain hose
bushing
frame
Figure 1
Remarks: In order to make sure of the correct of installation, it is suggested to
change the direction of the drain hose with our company serviceman .

Usage of the drain hose

The drain hose shall drain smoothly
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not trample or press the drain hose.
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
3.Dismantle the protecting cover of the
drain outlet at the other side Install the
drain hose bushing
(As Indicated in Figure 2).
4.Extend the drain hose from the other
side. Fix the drain hose with the drain
hose frame(As indicated in Figure 3).
Drain outlet
protecting cover
Drain hose
Figure 3
bushing
Figure 2
5.Install the protecting cover of the drain
outlet at the other side (As indicated in
Figure 4).
4.If extra drain hose is needed,
please make separate purchase.
The inner diameter of the extra
hose shall not less than 30mm, and
the length shall not exceed 1.5m.
5.If the extra hose is too long,
cut it either at A or at B point.
5
Drain outlet
Drain hose
protecting cover
frame
Drain hose
Figure 4