Haier HWM60-728 User Manual page 15

ATTENTION
Even there's no water in the tub, the spinning will start
Attention
after a certain period.
Wash and spin after putting the damageable clothes
into tuck net, to avoid scathe.
Wash the laundries that are prone to lose colors separately
from other laundries.
Do not use soak process for woolen laundries.
3.Push the "PROCESS" button to select suitable procedure
Procedure program selection method
Times of pushing the Selected procedure
program
PROCESS button
WASH
standard program
(the washing liquid
remains in the tub)
WASH
(the rinsing liquid
remains in the tub)
RINSE
(spin after drain)
SOAK
RINSE
Push the PROCESS button for 6 times,and it will resume the initial mode,it will
circulate in that sequence.
If the QUICK program is selected, the water level will
Low ,you have to set the full procedure of wash,rinse and spin.The
procedure can not be selected.
Applicable circumstance
When the common laundries
RINSE SPIN
need washing, rinsing and
spinning
WASH
Repeat using the washing
liquid
When prevent the laundries
RINSE
from corrugating, and the
laundries do not need
spinning
When the laundries need
SPIN rinsing and spinning after
manual washing
When the laundries need
SPIN
only spinning after manual
washing (first drain then
spin)
The laundries are very dirty,
or the sleeves and collars of
WASH
the shirt are very dirty. First
SPIN
soak then wash
13
PROCESS
Contents (the lighted
indicators indicate the
programs about to run)
SOAK WASH RINSE
SOAK WASH RINSE
SOAK WASH RINSE
SOAK WASH RINSE
SOAK WASH RINSE
SOAK WASH RINSE
automatically set
SPIN
SPIN
SPIN
SPIN
SPIN
SPIN