Table of Contents
Advertisement
Installation & Adjustment
Usage the drain hose
The drainage shall be smooth with the drain hose.
1,First connect the drainage hose to the connection
point on the lower right side of the cabinet, and fasten
with drainhose clamp (provided).
2,Connect drain hose guide on to the outside of
drainage hose. To guide the drain hose over the
tub or standpipe, the bracket MUST be fitted
to the drain hose.
1,The height of the standpipe or tub should be
between 0.8 - 1.2 m.
2,To avoid syphoning, the drain hose should not
extend more than 20 mm from the end of the guide.
Ensure drainage hose is held in place to avoid
leaks or spills.
Inlet pipe connection
The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
Confirm the water faucet
water faucet,suitable
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid
leakage.
The exit end face of the faucet
Drain hose joint
water faucet, not suitable
6
Bracket
Drain hose
clamp
0.8 m h
1.2m
Advertisement
Table of Contents
