Safety Precautions - Haier HWM60-728 User Manual

Safety precautions

Please plug the power plug on special
220V/10A receptacle. Be sure to use
single-phase three pins receptacle.
Ensure the earthing prong of the
power receptacle is earthed reliably.
Use leakage protector if possible.
Do not damage the power cord,bend,extend,twist,bind or alter it by force.Do not press
or nip it with weight.If the power cord or the power plug is bad,or the power plug
becomes flexible,to avoid risk it is required to
have it replaced by the technicians of
our special shop or the after-sale service
department.Keep the pin of the power plug
clean,if the power plug is polluted with dust,
please wipe with dry cloth carefully.
Do not put the machine at damp
place like the bathroom . Never
wash it with water. Do not place
wet laundries on the control panel.
In case the washing machine is in-
stalled on ground with carpet, do not
block the ventilation hole with carpet.
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Earth
2
The power cord plug should be conve-
nient to be pluged in or pluged out with
hand while the washing machine runs
normally.Be sure to pull the plug out
and close the water tap when the mac-
hine is idle,when moving the machine,
or when cleaning the machine.Do not
use wet hand to insert or pull out the
power plug.
Do not use water hotter than 50 C .
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.