Usage The Drain Hose; Inlet Pipe Connection - Haier HWM120-M826 Owner's Manual

Installation & Adjustment

Usage the drain hose

The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be
less than 10cm, or the drainage will not be
smooth，and cost such long time that the
machine may stop at mid way.
2.Do not trample or press the drain hose.
3.If the drain hose is too long, cut it at mid
point. To make smooth drainage,cut the
front end of the hose slantingly.
Note: he instructions for appliances connected to the water mains by detachable
hose-sets shall state that the new hose-sets supplied with the appliance are to
be used and that old hose-sets should not be reused.

Inlet pipe connection

The new hose-sets supplied with the appliance are to be used and that old hose-sets
should not be reused.
Confirm the water faucet
water faucet,suitable
The exit end face of the faucet
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid
leakage.
4.If extra drain hose is needed, please
make separate purchase.The inner
diameter of the extra hose shall not
less than 30mm,and the length shall
not exceed 1.5m.
5.If the extra hose is too long, cut it either
at A or at B point.
water faucet, not suitable
6
A B