Briggs & Stratton Murray Pro Series Owner's Manual page 25

REPAIR PARTS
HANDLES
NOTE: All component dimensions given in U.S. inches.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
SNOW THROWER - MODEL NO. 630106X31(96197001200)
KEY PART
NO. NO. DESCRIPTION
1 405783X479 Lever, Auger Control, RH
2 405999X479 Lever, Traction Drive Control, LH
4 178888 Bushing, Flange
5 169675 Retainer, Hairpin
6 17060406 Screw, Hex Head 1/4-20 x 3/4
7 178652 Rod, Interlock
8 196333X008 Arm, Impeller Rod
9 196334X008 Arm, Traction Rod
10 196619X479 Panel, Control
11 74780524 Screw, Hex Head 5/16-18 x 1-1/2
12 74780512 Screw, Hex Head
13 405293X479 Handle Tube, LH
14 405294X479 Handle Tube, RH
15 751153 Nut, Lock 5/16-18
16 19131316 Washer, Flat 3/8
17 178899 Knob, Handle
18 180480 Rod, Auger Control
19 180481 Rod, Traction Control
22 72120618 Bolt, Carriage 3/8-16 x 2-1/4
23 178643X479 Handle Tube, Lower
24 180447 Sleeve, Spring
25 180926 Spring, Traction Drive
26 178669 Spring, Auger Control
27 17000616 Screw, Hex Head 3/8-16 x 1
28 198559 Bushing, Pivot
30 183346 Console, Panel
31 175262 Screw, Hex Head, Tapping #10-24 x 1-1/4
32 184471 Screw, Hex Head, Tapping #10-24 x 1/2
38 178666 Headlight, Halogen (Includes Bulb)
- - 401620 Bulb, Halogen
39 178668 Bezel, Headlight
40 180964 Harness, Headlight (Halogen)
47 196944 Mounting Bracket, Control Panel, RH
48 196943 Mounting Bracket, Control Panel, LH
49 199513 Grip, Handle
1 inch = 25.4 mm
25