Briggs & Stratton Murray Pro Series Owner's Manual page 23

REPAIR PARTS
CONTROL PANEL / DISCHARGE CHUTE
NOTE: All component dimensions given in U.S. inches.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts.
Failure to do so could be hazardous, damage your snow thrower and void your warranty.
SNOW THROWER - MODEL NO. 630106X31(96197001200)
KEY PART
NO. NO. DESCRIPTION
1 183333 Knob, Lever
2 17501010 Screw #10-24 x 5/8
3 179096X479 Strap, Slotted
4 73800600 Nut, Lock 3/8-16
5 19131316 Washer, Flat 3/8
6 404974 Control Assembly, Chute Rotater
7 405784X479 Support, Pivot
8 150078 Screw, Hex Head 5/16-18 x 3/4
9 189713X615 Knob, Defl ector
10 185600 Bolt, Shoulder
12 191730 Nut, Lock 1/4-20
13 72270505 Bolt, Carriage 5/16-18 x 5/8
14 179246 Washer, Nylon
15 404770X459 Chute Assembly
16 178633X459 Defl ector Assembly
17 179145 Seal, Defl ector
18 128415 Rivet, Blind
19 183333 Knob, Speed Control Lever
20 72270506 Bolt, Carriage 5/16-18 x 3/4
21 155415 Washer, Flat
25 198541 Nut, Lock 5/16-18
26 198474 Lever Assembly, Speed Control
27 169675 Retainer, Hairpin
28 180445 Rod, Upper, Speed Control
29 187716 Rod, Lower, Speed Control
30 192710 Clamp, Clean-Out Tool
31 192199 Tool, Clean-Out
1 inch = 25.4 mm
23