Peripheral Setup Page - PCchips M765VMRT Manual

Peripheral Setup Page

This page sets some of the parameters for peripheral devices
installed on the system.
Onboard FDC Use this item to enable or disable the onboard
floppy disk drive interface.
Onboard Serial Use this item to enable or disable the onboard
serial port COM1/3, and to assign a port
Port1
address
Onboard Serial
Use this item to enable or disable the onboard
Port 2 serial port COM2/4, and to assign a port
address
Serial Port2 Mode
Use this item to allocate the resources of the
second serial port. Under Normal, the
resources are allocated to the onboard serial
port. Under ASKIR or IrDA, the resources are
allocated to the onboard IR port,
IR Duplex
Use this item to define if the optional infrared
port is full-duplex or half-duplex.
Onboard Parallel Use this item to enable or disable the onboard
Port parallel port LPT1, and to assign a port address
36