Installing A Socket-370 Processor - PCchips M765VMRT Manual

Chapter 2
2. The Slot-1 is installed with a cartridge holder. The upright
struts of the cartridge holder are folded down for shipping. Pull
the struts upwards so that they are in the upright position.
3. Insert the processor cartridge into the cartridge holder. Follow
the instructions given with your processor cartridge. The edge
connector on the cartridge has a notch so that it only fits into
the Slot-1 in the correct way.
4. Locate the cooling fan power supply FAN1. Connect the cable
from the processor cartridge cooling fan to FAN1.
5. Locate the jumper JP4. Use this jumper to select if you have
installed a Slot-1 processor or a Socket-370 processor. The
jumper settings are illustrated below.
1
JP4
Selects a Slot-1
processor
6. On this mainboard, you can configure the processor by
entering the correct settings in the BIOS setup utility.

Installing a Socket-370 Processor

The PPGA processor installs into the ZIF (Zero Insertion Force)
Socket-370 on the mainboard.
10
1
JP4
Selects a Socket-370
processor