Table of Contents
Advertisement
Mainboard Installation
To install this mainboard into your system, follow the procedures
in this chapter:
Identify the mainboard components
Install the correct processor
Install one or more memory modules
Verify that any jumpers or switches are at the correct setting
Install the mainboard in the system chassis
Install any extension cables to the mainboard headers
Install any other devices and make the appropriate connections
to the mainboard headers.
Note: Before installing the mainboard, you must ensure that the
Clear CMOS jumper JP5 is set to the Normal setting. See this
chapter for information locating JP5 and changing the jumper
setting.
Note: Please do not use the AC power cord to connect the system
case to a power outlet until you have completely installed the
mainboard and components. In some circumstances, the power
management of the system might damage components and create
unsafe conditions by allowing power to flow before the installation
is complete,
Chapter 2
Advertisement
Table of Contents
