Fax/Modem Daa Module - PCchips M765VMRT Manual

2. Plug the cable from the bracket into the PRN1 header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.

Fax/Modem DAA Module

The Fax/Modem DAA module plugs directly into the mainboard
adjacent to an expansion slot in the system chassis. When you
remove the blanking plate from the system chassis, you can access
the LINE and TEL RJ11 phone jacks on the metal edge of the Fax/
Modem DAA module.
J3-MODEM Header
GND 1
2 MCLK
GND 3
4 FRA-SY
GND 5 6 SCLK
AUX 3V 7
8 RIN-WAK
HOOK 9
10 KEY
RIN 11
12 SDO
AUX 5V 13
14 SDI
MUTE 15
16 RST
1. Locate the J3 modem header on the mainboard.
2. Plug the Fax/Modem DAA module into the J3 modem header.
3. Remove the blanking plate adjacent to the Fax/Modem DAA
module.
Line & Tel
RJ11 phone
jacks
Modem Header
Install the Mainboard
Modem DAA Module
19