Table of Contents
Advertisement
Install the Mainboard
Install the mainboard into the system chassis. This mainboard is
baby AT-sized and the I/O ports are provided on extension
brackets. In addition the mainboard can operate using an AT power
supply unit or an ATX power supply unit. This means that you
have a wide choice of cases that can be used by this mainboard.
Install the mainboard into the unit case. Follow the instructions
provided by the case manufacturer using the screws and mounting
points provided in the chassis.
1
J10
ATX-PW1
AT-PW2
FAN2
Connect the power cable from the power supply unit to the power
connector on the mainboard. If you are using an AT power unit,
connect it to the AT power connector PW2. If you are using an
ATX power unit connect it to the ATX power connector PW1.
If the case that you are using has a chassis cooling fan, connect the
power cable from the fan to the onboard chassis cooling fan power
supply FAN2.
Connect the case switches and indicator LEDs to the bank of
switch and LED connectors J10. See the illustration below for a
guide to the pin functions of the J10 case connector.
15
Advertisement
Table of Contents
