Standard CMOS Setup Page
Use this page to set basic information such as the date and time,
the IDE devices, and the diskette drives.
Date & Time
Use these items to install your system with the
correct date and time
Pri Master
Use these items to configure devices on the
primary and secondary IDE channels. To
Pri Slave
configure a hard disk drive, choose Auto. If the
Sec Master
Auto setting fails to find a hard disk drive, set it to
Sec Slave
User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-
ROM drive, select the setting CDROM. If you
have an ATAPI device with removable media
(e.g. a ZIP drive or an LS-120) select
FLOPTICAL.
Floppy Drive A
Use these items to set the size and capacity of
Floppy Drive B
the floppy diskette drive(s) installed in the
system.
28