Table of Contents
Advertisement
BIOS Setup
DMA Channel 0,
These options specify the bus that the
1, 3, 5, 6, 7
specified DMA channel is used on.
IRQ3, 4, 5, 7, 9, 10,
These options specify the bus that the
11, 14, 15
specified IRQ line is used on. These options
allow you to reserve IRQs for legacy ISA
adapter cards.
Reserved Memory
This option is designed to be used for
Size
reserving memory for the IO card.
Reserved Memory
This option is designed to be used for
Address
reserving memory address for the IO card.
Peripheral Setup
Choose the item from the BIOS Setup main menu.
OnBoard FDC
This option enables the FDC (Floppy Drive
Controller) on the motherboard or auto
detects the FDC.
OnBoard Serial
This option specifies the base I/O port
Port1
address of serial port 1.
OnBoard Serial
This option specifies the base I/O port
Port2
address of serial port 2.
Serial Port2 Mode This option specifies the serial port2 mode.
Normal: The normal serial port mode is
being used.
IrDA/ASKIR: The serial port2 will be
redirected to support IR function
when this option is set to IrDA or
ASKIR.
29
Advertisement
Table of Contents
