Load Optimal Settings; Load Best Performance Settings - PCchips M765VMRT Manual

Chapter 3
PCI VGA Palette
When this item is enabled, multiple VGA
devices operating on different buses can handle
Snoop
data from the CPU on each set of palette
registers on every video device.
Assign IRQ for
If this item is enabled, an IRQ will be assigned
to the VGA graphics system. We recommend
VGA
that you set this value to No.
PCI Slot X IRQ
You may install expansion cards in the PCI
Priority slots that require the use of an Interrupt
Request Line. Use these items to determine
which slot has priority when the plug and play
OS/BIOS is dynamically allocating IRQs to
competing demands from the expansion cards.
DMA Channel X If you set this to PnP, the system will
dynamically allocate DMA channels as they are
required. If you set a DMA channel to ISA/EISA,
it will be reserved for a non-plug and play ISA
or EISA device.
IRQ X If you set this to PCI/PnP, the system will
dynamically allocate IRQs as they are required.
If you set an IRQ to ISA/EISA, it will be
reserved for a non-plug and play ISA or EISA
device.

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
optimal default values. The optimal default values are not very
demanding and they should allow your system to function with
most kinds of hardware and memory chips.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the setup utility is loaded with a set of
best-performance default values. The optimal default values are
quite demanding and your system might not function properly if
you are using slower memory chips or other kinds of low-
performance components.
35