Install The Mainboard - PCchips M848LU Manual

1
JP3
Jumper JP3: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your mainboard from operating.
To clear the CMOS memory, disconnect all the power cables from
the mainboard and then move the jumper cap into the CLEAR
setting for a few seconds.
Function
Clear CMOS
Normal Mode

Install the Mainboard

Install the mainboard in a system chassis (case). The board is an
ATX size mainboard. You can install this mainboard in an ATX
case. Ensure your case has an I/O cover plate that matches the
ports on this mainboard.
Install the mainboard in a case. Follow the instructions provided by
the case manufacturer using the hardware and internal mounting
points on the chassis.
1
CHASIS
FAN
1
SW1
SYSTEM
FAN
1
Jumper Setting
Short Pins 1-2
Short Pins 2-3
12
CN1
ATXPW1