Accessories; Included Accessories; Spare Parts - Grundfos AQC-D5 Installation And Operating Instructions Manual

10. Screw the additional pH and redox or temperature electrodes
into the designated locations (pos. A1/A2 or D). Only place
the potentiostatic measuring electrode (pos. E), do not screw
it in.
Caution
Do not touch the electrode surface (pos. E / 1)!
11. Connect the measuring cables and electrodes with the same
marking colour.
12. Contact the counter-electrode (pos. M) with the measuring
amplifier (pos. P/Q).
13. Connect the sample water inlet (pos. J) and outlet (pos. K).
14. Open the sample water inlet (pos. J), and adjust the flow with
the adjusting spindle (pos. L).
15. Connect the cleaning motor (pos. H) with the power supply.
16. Screw in the potentiostatic measuring electrode (pos. E)
manually up to the stop.
Please observe also section
Caution
electrodes.
17. Before calibration, keep a running-in period of at least two
hours.
For further maintenance, cleaning and repair, follow the
instructions given in the installation and operating
instructions of the components.
Strictly observe the maintenance instructions in the
Caution
installation and operating instructions of the
components!

14. Accessories

14.1 Included accessories

•
•

14.2 Spare parts

14.2.1 Spare parts for AQC-D5 preassembled system
14.2.2 Spare parts for measuring cell AQC-D5
9.2 Installation of
Buffer solution (1 container)
2 spare tubes for peristaltic pump.
Description
Buffer solution
Spare parts set for peristaltic pumps
(containing 1 tube)
Description
Spare parts set for the potentiostatic measuring
cell consisting of 15 balls (glass), magnetic
stirring stone, slide disk and gasket
Spare electrode for the potentiostatic measuring
cell
Spare parts set for the sample water filter
consisting of spare filter element with gasket and
adaptor
Product
number
91835799
(549-300)
91836486
(553-1100)
Product
number
91835822
(553-1010)
91835242
(314-251)
91835368
(48.876-1)
17