Configure Arming Schedule - HIKVISION DS-7608NI-M2 Series User Manual

3. Click to set alarm configuration.
1) Select IP Camera(s) and IoT channel(s), and complete access control event display settings.
Display Pop-Up
Enable this function, the pop-up including person type information, body temperature and
mask-wearing status (optional) will be displayed once the alarm is triggered.
Mask Not Wearing Event
Temperature units including Celsius degree and Fahrenheit degree of the detected target
are available. Enable this function, when the target does not wear mask, the pop-up will
show yellow. Meanwhile, if the target has exceptional body temperature, the pop-up will
turn red.
4. Select the historical analysis (
Note
The smart analysis results of the detection are displayed in the list. Click a result in the list to
play the related video.

6.4 Configure Arming Schedule

Steps
1. Click Arming Schedule.
2. Click Edit.
3. Select a day of the week and set the time period. Up to eight time periods can be set each day.
Note
Time periods cannot repeat or overlapped.
Network Video Recorder User Manual
) or real-time analysis ( ) to obtain the results.
79