Defocus Detection - HIKVISION DS-7608NI-M2 Series User Manual

Detects a steep sound drop in the surveillance scene. Detection sensitivity [1-100].
6. Set the arming schedule. Refer to Configure Arming Schedule.
7. Set the linkage actions. Refer to Configure Linkage Actions.
8. Click Apply.

6.2.19 Defocus Detection

Image blur caused by lens defocus can be detected.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Defocus.
4. Check Enable.
5. Optional: Check Save VCA Picture to save the captured defocus detection pictures.
6. Set the detection sensitivity.
Sensitivity
Sensitivity range: [1-100]. The higher the value is, the more easily the defocus image will be
detected.
7. Set the arming schedule. Refer to Configure Arming Schedule.
8. Set the linkage actions. Refer to Configure Linkage Actions.
9. Click Apply.
Network Video Recorder User Manual
Figure 6-16 Defocus Detection
75