Grease Filter Removal, Installing The Activated Charcoal Filter - Caple DD912BK Instruction Manual

/ducting
Check for a non Check for a non
Check for a non
G R E A S E F I LT E R R E M O V A L ,
move
move
I N S T A L L I N G T H E C H A R C O A L F I LT E R S
move
The removal and fitting of the grease and charcoal filters need to be carried out with the
downdraft in the open position. To open the downdraft, push the
panel, pushing the upper part of each side at the same time. The panel will rotate forwards to
make it possible to access the grease filters (Fig. 6) Remove the grease filters to access the
carbon filters.
(Fig. 12). The replacement of the charcoal filters has to be carried out accordingly to the effective
use of the downdraft, and in any case at least one every six months.
WA R N I N G :
After having replaced the filters, reinstall the front stainless steel panel, otherwise the downdraft is
not functional.
N OT E :
Replacement filters (CAP43CF) can be purchased at www.caple.co.uk.
is
6
Please keep this instruction manual for future reference
Removing the grease filter and Removing the grease filter and
installing the charcoal filter
installing the charcoal filter
Removing the grease filter and
installing the charcoal filter
 key. Then remove the front 
the key

Instruction manual DD912BK
c c
c
12
13