Table of Contents
Advertisement
Chapter 3. Operation
S
TATUS
O
NLINE
N
R
O
ESPONSE
E
MPTY
O
FFLINE
O
/N
FFLINE
O
R
ESPONSE
R
EV
M
/M
ODULES
ENU
3-4
This read-only field provides status information on the Octal BRI/U Module.
The following messages may display:
The module is enabled, and is responding to the system controller's status
polls. This is the normal response of the system.
The module is enabled, but is not responding to the system controller's sta-
tus polls. This response indicates either a problem in the system or that the
module is not installed.
The system controller has not detected the presence of a module in the slot,
nor has a module been manually enabled for this option slot.
The module is installed, but has been taken offline by a user. The module is
still responding to controller polls.
The module is installed, but has been taken offline by a user. The module is
not responding to polls.
This read-only field displays the hardware revision of the Octal BRI/U Module.
Figure 3-3 shows the menu options available for the Octal BRI/U Module
(see also the menu tree in Figure 3-2 on page 3-2). The following sections de-
scribe these options.
Octal BRI/U Module User Manual
Figure 3-3. Octal BRI/U Module Menu Options
61200186L2-1
Advertisement
Table of Contents
