Table of Contents
Advertisement
Chapter 3. Operation
T
EST
S
TATE
S
TATUS
O
NLINE
N
R
O
ESPONSE
E
MPTY
O
FFLINE
O
/N
FFLINE
O
R
ESPONSE
R
EV
30
Read security: 5
Displays test name if the Octal BRI S/T Module is executing a test. Press
in this field to activate the menu.
Enter
Displays module status as either O
is physically installed, it must be marked as online for it to be considered an
available resource. This field allows an installed module to be marked as of-
fline, which may be useful in system troubleshooting. If you choose O
the module will not be in alarm condition, but will display O
Once a module is installed, S
for the ATLAS 800 Series unit to use the module for any data
bandwidth.
This read-only field provides status information on the Octal BRI S/T Module.
The following messages may display:
The module is enabled, and is responding to the system controller's status
polls. This is the normal response of the system.
The module is enabled, but is not responding to the system controller's sta-
tus polls. This response indicates either a problem in the system or that the
module is not installed.
The system controller has not detected the presence of a module in the slot,
nor has a module been manually enabled for this option slot.
The module is installed, but has been taken offline by a user. The module is
still responding to controller polls.
The module is installed, but has been taken offline by a user. The module is
not responding to polls.
This read-only field displays the hardware revision of the Octal BRI S/T Mod-
ule.
Octal BRI S/T Module User Manual
of O
. Even though a module
NLINE
FFLINE
must be set to O
TATE
,
FFLINE
.
FFLINE
in order
NLINE
61200343L1-1
Advertisement
Table of Contents
