User-Entered Calibration,
11. Press
READ/ENTER
return to the measurement mode.
Note: When a factory calibration curve has been edited, the "calibration adjust" icon will
appear in the display.
Exiting the Calibration Routine
Exit the calibration routine by pressing the
mode. The instrument uses the last completed user-entered calibration or the
factory calibration if no user-entered calibration has been completed.
Deleting Calibration Points
1. Select the range containing user-entered calibration points. See
Ranges on page
2. Press and hold the
.
READ/ENTER
Note: Calibration points can also be deleted in Edit mode.
3. Press
ZERO/SCROLL
.
READ/ENTER
网址:www.mamots.com
continued
to add more calibration points, or press
2—4.
key until "USER", then "CAL" appears. Press
MENU
to select the point to delete (e.g., S0 or S1 or S2). Press
key to return to measurement
MENU
2—24
客服:400 688 9809
twice to
MENU
Switching
电话:0431-85178766