Opening/Closing The Top Cover - Toshiba B-SV4T SERIES Owner's Manual

2. PRINTER SETUP
2.6 Opening/Closing the
Top Cover
WARNING!
1. To avoid injury, be careful
not to trap your fingers
while opening or closing
the cover.
2. When closing the Top
Cover, do not place your
hands or fingers between
the Top Cover and the
Lower Cover. The Top
Cover may free-fall, which
may cause injury.
CAUTION!
1. Be careful not to touch the
Print Head Element when
opening the Top Cover.
Failure to do this may
cause missing dots by
static electricity or other
print quality problems.
2. Do not forcibly close the
Top Cover while it is held at
Position 1 or Position 2.
Doing this could damage
the Top Cover Support.
When opening or closing the Top Cover, please be sure to follow the
instructions below.
To open the Top Cover:
1. Turn the Cover Open Levers frontward, and gradually open the Top
Cover.
Cover Open Lever
There are four positions for the Top Cover: OPEN position, Position 1,
Position 2, and CLOSE position. The Top Cover can be held at Position
1 or Position 2.
OPEN position
Position 2
Position 1
CLOSE position
To hold the Top Cover at Position 1, fist open the Top Cover until the
Top Cover Support goes over Position 1 ( ), then close the Top Cover a
little ( ) to secure the Top Cover Support.
E2- 5
ENGLISH VERSION EO1-33062

2.6 Opening/Closing the Top Cover

Top Cover
Cover Open Lever
OPEN
2
1
CLOSE
Top Cover Support
Position 1