Sharp AH-XP Series Operation Manual page 3

service agent or a similarly qualified
person in order to avoid a hazard. Use
only the manufacture-specified power
cord for replacement.
• Do not splash or pour water directly
on the unit. Water can cause electrical
shock or equipment damage.
• Do not attempt to install/remove/repair
the unit by yourself. Incorrect work will
cause electric shock, water leak, fire
etc. Consult your dealer or other quali-
fied service personnel for the installa-
tion/removal/repair of the unit.
CAUTION
• Open a window or door periodically
to ventilate the room, especially when
using gas appliances. Insufficient ven-
tilation may cause oxygen shortage.
• Do not operate the buttons with wet
hand. It may cause electric shock.
• For safety, turn the circuit breaker off
when not using the unit for an extend-
ed period of time.
• Check the outdoor unit mounting rack
periodically for wear and to make sure
it is firmly in place.
• Do not put anything on the outdoor
unit nor step on it. The object or the
person may fall down or drop, causing
injury.
• This unit is designed for residential
use. Do not use for other applications
such as in a kennel or greenhouse to
raise animals or grow plants.
• Do not place a vessel with water on
the unit. If water penetrates into the
unit, electrical insulations may deterio-
rate and cause electric shock.
• Do not block the air inlets nor outlets
of the unit. It may cause insufficient
performance or troubles.
• Be sure to stop the operation and turn
the circuit breaker off before perform-
ing any maintenance or cleaning. A
fan is rotating inside the unit and you
"OM TINSEB052JBRZ EN+CS+TH"文件夹.indb 2
may get injured.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
• Make sure to connect the air condition-
er to power supply of the rated voltage
and frequency. Use of a power supply
with improper voltage and frequency
can result in equipment damage and
possible fire.
• Do not install the unit in a place where
inflammable gas may leak. It may
cause fire.
Install the unit in a place with minimal
dust, fumes and moisture in the air.
• Arrange the drain hose to ensure
smooth drainage. Insufficient drainage
may cause wetting of the room, furni-
ture etc.
• Make sure a leak breaker or a circuit
breaker is installed, depending on the
installation location, to avoid electrical
shock.
EN-2
2018/10/19 15:27:19