Display Button; Maintenance - Sharp AH-XP Series Operation Manual

DISPLAY BUTTON

Press the DISPLAY button when the
lamps on the unit are too bright.
1
During operation, press the
DISPLAY button.
• The lamps on the unit will become
dark.
TO LIGHT UP
Press the DISPLAY button again.
"OM TINSEB052JBRZ EN+CS+TH"文件夹.indb 13

MAINTENANCE

Be sure to disconnect the power cord
from the wall outlet or turn off the
circuit breaker before performing any
maintenance.
CLEANING THE FILTERS
1
Turn off the unit.
2
Remove the filters.
① Lift the open panel.
② Pull the air filters down to re-
move them.
3
Clean the filters.
• Use a vacuum cleaner to remove
dust. If the filters are dirty, wash
them with warm water and a mild
detergent. Dry filters in the shade
before reinstalling.
4
Reinstall the filters and close
the open panel.
1
CLEANING THE UNIT AND THE RE-
MOTE CONTROL
• Wipe them with a soft cloth.
• Do not directly splash or pour wa-
ter on them. It can cause electrical
shock or equipment damage.
• Do not use hot water, thinner, abra-
sive powders or strong solvents.
EN-13
2018/10/19 15:27:28