Furuno VR-3000 Operator's Manual page 4

SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Immediately turn off the power
(BATTERY, DC and AC switches in
that order) at the DCU and also turn off
off the power at the ship's mains
switchboard if water leaks into the
equipment or the equipment is emitting
smoke or fire.
Continued use can cause fatal damage to
the equipment.
Only authorized personnel shall
disassemble the DRU.
Pressure may build up inside the unit when
it is subjected to fire or is retrieved from a
great depth.
Do not allow rain or water splash to
contact the equipment.
Fire or electrical shock can result.
WARNING LABELS
Warning labels are attached to the DCU.
Do not remove the labels. If the label is missing or
damaged, contact a FURUNO agent or dealer
about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
ii
Name: Warning Label 1
Type: 86-003-1011-2
Code No.: 100-236-232-10
Name: Warning Label 2
Type: 03-129-1001-2
Code No.: 100-236-742-10
WARNING
Do not disassemble the battery.
Battery fluid is harmful to the eyes and skin,
particularly the eyes. If the fluid contacts
skin or eyes, flush area with fresh water
and contact a physician immediately.
Do not dispose of the battery or acoustic
beacon in fire.
Those components may burst if disposed of
in fire. Further, dispose of the battery in
accordance with appropriate regulations.
Do not touch any electricaly conductive
parts.
Touching electrically conductive parts can
result in electrical shock. Use rubber gloves,
etc. when conducting inspection or
maintenance work.
Do not short battery terminals.
Short can lead to bursting or fire.
CAUTION
Do not:
- use batteries of different capacities
- mix old batteries with new
- mix batteries of different makes
Batteries themselves may become
damaged or damage to electrical
parts may result.