VR-3000 VOYAGE DATA RECORDER
VR-3000S SIMPLIFIED VOYAGE DATA RECORDER
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
Data Collecting Unit (DCU)
HDD holder
Remote Alarm Panel (RAP)
DIMMER:
Adjust panel backlighting;
display software version
no. (pressed together).
TEST: Tests LCD.
SAVE: Stops recording onto current memory area in the backup
HDD and starts recording onto another menory area.
Operator's Guide
Backup HDD (inside)
Buzzer
ACK: Silences buzzer.
www.furuno.com
LEDs: Light (green) when respective power is applied.
Status Display
LEDs (from left)
SAVE (yellow):
Starts blinking from OFF state
when recording is stopped,
then lights steadily.
If the backup HDD is disconnected,
this LED lights also.
NORMAL (Green):
On at normal operation.
ERROR (red):
Lights for error.
Breaker switches (from left)
Battery Backup, DC, AC
Status Display
--X: Indicates that X no. of recording
areas exist. (X: 4, 3, 2, 1)
---: Recording area is not yet known.
(at startup or when recognizing HDD)
LEDs (from left)
SAVE (yellow):
Starts blinking from OFF state
when recording is stopped,
then lights steadily.
If the HDD is disconnected,
this LED lights also.
NORMAL (Green):
On at normal operation.
ERROR (red):
Lights for error.